dji digital fpv rotor riot cl1 hd

Description

This listing is for one single quadcopter with no air unit installed.
You must provide your own air unit to fly this quad. This units has been specifically setup for the dji goggles and controller to work.
An affordable, durable, DJI HD compatible frame. We took the design of the CL1, and stretched it out to easily fit the DJI HD FPV system. Flying in HD is expensive. Save some cash by pairing it with a solid, afforable frame.
Above is an excerpt from the rotorriot product page for this frame, Save some cash without sacrificing performance is my reasoning for this first build here.
The motors are the 2306 newbiedrone flow series in 1850kv. Newbiedrone electronics and motors brand is known for the highest quality control standards in there lineups. The flight stacks are the most expensive there is so being able to get a deal on these motors for this build means You get more and I can charge less.
These motors with this frame makes sense on so many levels. For the electronics I wanted full performance from rpm filtering and biderectional dshot so theres a paid license on the esc board for the exclusive JESC firmware. I used a tried and tested cheaper eachine 6s 4 in 1 esc as the difference between this at and something at running a 6s battery is almost nill.
This allows me to spend that extra money saved to install a fancy led system and use an f7 flight controller. The f7 is the best tech for a beginner as angle mode being flown is much faster on an f7 than its f4 counterpart thanks to its higher number crunching capabilities.
If you have your own air unit and just want a spare quad then this is perfect.