Ethernet / Internet 16 Channel Relay Board: IP, SNMP, iOS / Android Software

Description

Ethernet / Internet 16 Channel Relay Board: IP, SNMP, iOS / Android Software
This is kit of IP controler and card with 16 SPDT relays. It is for home automation, hobby and commercial projects. It allows you controlling electrical devices via LAN/WAN (Internet). Just connect the device into your local network and control it from another computer or android smartphone over the LAN or Internet. This IP relay board can be controlled from: Configuration utility - DAEnetIP2 Manager, web browser, command line, android smartphone application or
Denkovi Relay Manager Software
. We can provide also software examples for developers.
Now with free Android and iOS mobile App!
Features
10 Mb Ethernet interface with Link/Activity Led
Power supply
- 12VDC
(no protection against overvoltage and inverse polarity);
Maximal current consumption:
600 mA / 12VDC
16
SPDT relay
channels (the type depends on the stocks quantity in our store):
TONGLING -
JQC-3FF-S-Z
(10A / 250VAC, 15A / 120VAC, 10A / 28VDC)
SUNHOLD -
RAS xx15
(10A / 250VAC, 15A / 120VAC, 15A / 24VDC)
8 analog inputs with 10 bit resolution (0-3.3VDC)
16 (2x8) bit configurable digital I/O port (0-3.3VDC) - in this kit they are reserved for the relay board
Dimensions: Relay PCB - 85mm / 300mm / 20mm; DAEnetIP2 - 43mm / 55mm / 15mm
Standart protocols: ARP, IP, ICMP (ping), DHCP
Supports snmp v1 (snmpset, snmpget, snmptrap), HTTP (integrated web server with autorization) , TFTP (for firmware upgrade)
Ports for SNMP (161) and HTTP (80) can be changed
Two MAC addresses protection
It can be configured with SNMP requests or web browser
Reset of the relays on incoming/outgoing ping timeout
Function "load outputs(relays) states from EEPROM on boot"
Each I/O line can be named by user via web browser
It can send traps according analog ADC level
Analog Inputs may be referred to control the relay according their level
Possibility of connection analog sensors to the analog inputs as LM34DZ, LM35DZ, LM335, MCP9700A
Relay PCB parameters: FR4 / 1.5mm / two layers / metallized holes / HAL / white stamp / solder mask / Extra PCB openings for better voltage isolation / Doubled PCB tracks for better voltage isolation
Denkovi software:
DAEnetIP2 Manager
,
DAE-iModules - FREE iOS mobile app
,
DAE-aModules - FREE Android mobile app
3rd parity software:
Command line utility - netsnmp
,
Android software (by iSwitch LLC, not free but inexpensive)
Software examples: .NET, Java, Labview and PHP - please contact us for download.
For detailed user manual - please contact us for download.
The auction includes
1 x IP controller (
DAEnetIP2
)
1 x 16 SPDT Relay Board
Flat ribbon labeled cable
DRM Software
- Denkovi Relay Manager Software. CD is not included in the package but the software is available for download from this
link
Application Examples
Security and fire alarm systems
Manual or automatic device restart if event occur
Management/monitoring for industrial
Sensor information processing
Remote electrical devices control
Remote lock/unlock doors
Home automation
DAEnetIP2 Ports
Port JP3 (P3)
Port JP4 (P5)
Port JP5 (P6)
Port JP6 (System Port)
PIN #
Bit
FUNC
DIR
Bit
FUNC
DIR
Bit
FUNC
DIR
Bit
FUNC
DIR
1
1
Free
I/O
1
Free
I/O
1
Free
Ain
-
3.3V
PWR
2
2
Free
I/O
2
Free
I/O
2
Free
Ain
-
3.3V
PWR
3
3
Free
I/O
3
Free
I/O
3
Free
Ain
-
Reserved
-
4
4
Free
I/O
4
Free
I/O
4
Free
Ain
-
Ping LED
Out
5
5
Free
I/O
5
Free
I/O
5
Free
Ain
-
Reserved
-
6
6
Free
I/O
6
Free
I/O
6
Free
Ain
-
Target RST
Out
7
7
Free
I/O
7
Free
I/O
7
Free
Ain
-
Switch (RST)
Out
8
8
Free
I/O
8
Free
I/O
8
Free
Ain
-
Switch (SCL)
Out
9
-
GND
PWR
-
3.3V
PWR
-
Vref(+3.3V)
PWR
-
Switch(SDA)
In/Out
10
-
GND
PWR
-
GND
PWR
-
GND
PWR
-
GND
PWR
Legend:
"Free"– the pin is free and defined for the user.
"XXXXXX" - the pin is reserved
"In" - the pin is input
"I/O" – digital input or output depending the settings
"Out" - the pin is output
"Ain"– analog input
Note that the relay board is connected to P3 and P5 digital outputs.
All the DAEnetIP2 I/O ports does not have any protection against overvoltage or reversed polarity.
For inputs, if the input voltage exceed 3.3V, the controller may be damaged. If you have questions how to use the I/O ports please contact with us or take a look into the manual.
Installation
Here are the steps (instructions) how to power on and connect the device directly to your computer (see
this image
). For router LAN connection (see
this image
)or Internet connection, please see in the user manual:
1.Connect the DAEnetIP2 controller with your computer via
UTP
crossover cable
. (note that the device does not support AUTO MDIX).
2.The flat ribbon cable connector must be fitted into to DAEnetIP2 IDC in this way
3.Connect each "In" labeled wire into the referred screw terminal of the relay board. For example "In 1" wire goes into Relay 1 In screw terminal, "In 2" wire goes into Relay 2 screw terminal and so on.
4.Connect the GND wire of the flat ribbon cable into the GND screw terminal of the relay board.
5.Connect supply jack to DAEnetIP2. You will have to find suitable power supply adaptor. DAEnetIP2 minimal supply voltage is 7.5 VDC. The maximal voltage is 25 VDC. It is recommended the supply voltage to be 12 VDC but 24 VDC also will work. DAEnetIP2 doesn't have any protection against inverted supply voltage, so be careful. The middle pin of the power terminal is + Vcc (Center positive tip polarity)
6.Connect the power wires to the relay board as it is shown on the image right to the text. It is possible to supply the DAEnetIP2 controller and relay board either with single either with 2 separate power supply sources.
7.Now you can power on the whole kit (for example plug the supply adaptor into the electricity network)
8.In case of success you have to see this when you power on the kit (the link led (top) is blinking and the bottom led by default shows the power on and it is constantly on)
9.Check if the relay board power led is on constantly
10. The kit in working condition
11.Open your LAN card network settings and save them, because next step is to change them.
12.Your initial computer IP should be in the device network range. So it is recommend to be 172.16.100.1. Mask 255.255.0.0. Gateway 172.16.100.1. Change them. There is lot of info in the net how to do it (for example a good link is
this one
)
13.Open web browser and type 172.16.100.2 – default username/password are “admin”/”admin”
14.Now you can access all the parameters via your web browser or software on your computer.
Default Settings
The controller has default settings, in case the access is lost. There are several steps for loading the default settings:
Turn off the power supply of the IP controller.
Move the jumper from position 1 to position 2.
Turn on the power supply of the IP controller.
Move the jumper from position 2 to position 1.
Turn off the power supply of the IP controller.
Turn on the power supply of the IP controller.
Default settings
Parameter
Value
DHCP
Disabled
IP
172.16.100.2
Mask
255.255.255.0
Gateway
172.16.100.1
VLAN ID
1
VLAN mode
Disabled
Access MAC 1,2
000000000000
SNMP access to IP
Enabled
SNMP listen UDP port
161
SNMP Read-only string
000000000000
SNMP RW string
private
SNMP/Web Access network IP
172.16.100.1
SNMP/Web Access network Mask
0.0.0.0 (disabled)
Ping Timeout
6
Restart on incoming ping timeout
Disabled
Restart on remote IP timeout
Disabled
Remote monitor IP
172.16.100.1
I/O ports settings
P3,P5 - Outputs
Pull-Up/Pull-Down
All “pull-down”
Reset I/O ports on restart
Disabled
TFTP update
Enabled
TFTP Server IP
172.16.100.1
Broadcast Frames
Parse
Web Server
Enabled
Web Server TCP port
80
SNMP traps target host
172.16.100.1
SNMP traps community
public
Low/High Analog Trap Threshold
0/1023 (disabled)
Analog Events – Low, High, Acc
None
Web user/password
admin/admin
DRM Software
Denkovi Relay Manager (DRM) is multiplatform software for easy controlling all kinds of Denkovi relay boards (USB,SNMP,TCP/IP)
CAUTION! Using of Denkovi Relay Manager (DRM) Software with devices which are not manufactured by Denkovi Assembly Electronics LTD is not allowed!
The item is supported by DRM Software. DRM Software will hep you to save money for expensive software and time in programming. It allows you to switch ON/OFF your devices at particular date and time, turn ON/OFF the relays with pulses or control them via specific sequence. If you have ordered at least one of our relay boards from this
list
you may turn your PC in powerful automation tool.
Multiplatform software: supported by Windows/Linux (ver. 2.0)
Control up to 32 relay boards
User-friendly intuitive interface
Save/Load file
Control mode: single and multiple setting of the relays
Single pulse with adjustable delay from the control mode (ver. 2.0)
Timer mode: create timer playlist for the relays
Weekly mode: each relay may be turned ON/OFF on each day of the week
Calendar mode: each relay may be turned ON/OFF on particular date at particular time
Pulse mode: each relay may work in pulse mode by setting duration for ON and duration for OFF. Adjustable number of pulses (ver. 2.0)
Each relay from each relay board can work independently in some of the five modes
Each relay board and each relay can be named by the user
Indicator panel
Auto load function - the last working file is loaded when DRM is started
Auto connect function - when the relay board is disconnected DRM will keep trying to find and when this is done, the relay board will be connected again
Auto start function - DRM software starts when the OS starts (currently this is not available for Windows 8 and Linux)
Auto set function - DRM will set the relays automatically when the relay board is connected
Possibility of DRM to starts when PC boots and continues to work from the last saved point
For more information about DRM Software, screen-shots, detailed description and download -
here
Mobile Apps
DAE-iModules iOS mobile App
- 100% FREE
DAE-aModules Android mobile App
- 100% FREE
Some useful information about
DAE-iModules/DAE-aModules
and
DAEnetIP2:
Select device
DAEnetIP2
. You must be sure the IP, UDP Port and SNMP community are correct, otherwise it won't enter into the device
To connect and scale the analog inputs with sensors, please refer to this link:
https://denkovi.com/connecting-analog-sensors-to-daenetip2
DAEnetIP2 Manager
DAEnetIP2 Manager is configuration utility for Denkovi DAEnetIP2 controller
Access many DAEnetIP2 controllers at a time
SNMPv1 protocol
Name for each controller
Support most of the DAEnetIP2 OIDs
Configurating each P3/P5 I/O line separately as input or output
Linearization (scaling) for the Analog Inputs (displaying the analog inputs values in human reading values - volts, meters degrees)
Thresholds can be converted automaticaly from human units into divisions
For download please use this link:
download
Control via web browser
In order to access your DAEnetIP2 controller from browser, your web browser have to supports javascript. Just write the IP address of the controller in the address bar and you will see the page, which is integrated in the controller (it has small built in server). The default username/password are admin/admin.
I/O Ports control/monitor
Traps/P5 control.
DAEnetIP2 can send traps if some analog input changes its level bellow/above some threshold (Low/High).
The same logic can be used for setting one of the digital outputs port - JP5 according analog input port JP6.
HTTP API Commands
DAEnetIP2 i/o lines can be controlled/accessed via HTTP API commands and basic access authentication is required to do that.
The digital outputs (P3 and P5) can be controlled by sending this HTTP command:
http://admin:admin[ at ]device.ip.address/iochange.cgi?ref=re-io&01=00&02=FF
admin:admin are the username:password
device.ip.address is the DAEnetIP2 IP address (by default it is 172.16.100.2)
01=00 is the state of P3 DO
02=FFis the state of P5 DO
For example:
http://admin:admin[ at ]172.16.100.2/iochange.cgi?ref=re-io&01=00&02=FF
The i/o states (P3, P5, P6) can be retreived by sending this HTTP command:
http://admin:admin[ at ]device.ip.address/ioreg.js
it will be received javascript file with several variables and one of them is:
var IO=new Array (0xFF, 0xFF, 0x80, 0x00AB, 0x0049, 0x0118, 0x014A, 0x012F, 0x003E, 0x0029, 0x01DD)
Bytes 0 and 1 are the digital I/O states (in hex format)
Bytes 3...10 are the Analog inputs values (in hex format)
For example:
http://admin:admin[ at ]172.16.100.2/ioreg.js
Command Line
Net-snmp
is free command line utility for windows which allows you to execute snmp commands from command line, BAT files, BASH scripts or any other sofwtare that can execute external .exe file or commands from command line. The instructions file how to install net-snmp and example commands can be downloaded from
here
.
Software examples
For developers - we can provide examples and support for various platforms:
Java Example
labVIEW example
VB.NET Express example
Useful Links
General links
User manual - contact us for
DAEnetIP2 user manual
SNMP definitions file (MIB file) -
here
Configuration utility - DAEnetIP2 Manager (Windows/Linux) -
DAEnetIP2Manager.exe
or
DAEnetIP2Manager.rar
The firmware file with the current actual version for
DAEnetIP2
-
here
(firmware history -
here
)
Connecting sensors to
DAEnetIP2
-
here
Software by Denkovi
DAE-iModules
- Mobile app for iOS mobile devices, support link
here
DAE-aModules
- Mobile app for Android mobile devices, support link
here
DAEnetIP Burner software for firmware upgrade -
here
. Instructions how to upgrade the firmware - see in the manual or
here
DAEnetIP2 Manager (Windows/Linux) - Configuration utility -
download here
DRM Software - software for controlling relays -
here
Third parity software
Android application for mobile devices by iSwitch LLC, Android market link -
here
, documentation -
here
, support page -
here
Net-snmp command line tool for windows (instructions how to install - see in the manual) and C++ library -
here
. Example commands -
here
iReasoning MIB browser (very useful tool) -
here
Majordomotic
- Cloud home automation software by the company EdelBit. It supports all our
ethernet relays
and
ip controllers
. Additional
android software
is available as well. Here we have tried to explain how to work with it together with our hardware -
https://denkovi.com/majordomotic-with-denkovi-ethernet-relays
MyDomoticaHd
- Android software by
www.phsoftware.altervista.org
. Additional explanation how to use the software with our
ethernet relays
and
ip controllers
- here:
https://denkovi.com/mydomoticahd-with-denkovi-ethernet-relay
Software Examples
C# .NET Express 2010
- Sets the outputs via snmp v.1 with timeouts
VB .NET Express 2010
- Very simple demo. It demonstrates how to set and get DAEnetIP2 ports values.
Java (Netbeans)
- Example for accessing DAEnetIP2 controller. Works in
Linux
/
Windows
/
Mac
PHP
- Example for controlling the 16 digital outputs and reading the ADC (tested with WAMP with snmp)
labVIEW 2011
- basic snmp manager for DAEnetIP2 build with labVIEW.
Node.js (SNMPv1)
- example how to communicate with the module using SNMPv1 set/get requests in Node.js.
More software examples:
here
Images
Please read before buy!